Amanda, 25th June 2022
How to Hard Wire Your Dash Cam in 7 Easy Steps
It was just a few short years ago that dash cams were considered a luxury item for the paranoid or those with something to hide. However, in the age of constant surveillance and "fake news", dash cams have become an essential piece of equipment for drivers all over the world.
Whether you're using your dash cam to capture footage of an accident or to keep an eye on your parked car, having a reliable dash cam is crucial.
If you're looking for a dash cam that won't let you down, we recommend hard wiring your dash cam. While it may seem like a daunting task, hard wiring your dash cam is actually quite simple and only takes a few minutes. Plus, once you've hard wired your dash cam, you'll never have to worry about it running out of battery power again.
In this article, we'll show you how to hard wire your dash cam in 7 easy steps. Let's get started!
Before we get started, let's quickly go over what you'll need:
1. A dashcam hardwire kit
2. A set of pliers
3. A screwdriver
4. Electrical tape
Now that you have everything you need, let's get started!
Step 1: Choose the Right Location for Your Dash Cam
The first step is to choose the right location for your road clarity dash cam. Ideally, you want to mount your dash cam behind your rearview mirror so that it doesn't obstruct your view.
However, if your car has a sunroof, you may want to mount your dash cam in the middle of your windshield so that the sunroof doesn't block the view.
Once you've chosen the perfect location for your dash cam, use the included adhesive mount to attach it to your windshield.
Step 2: Connect the Power Cable to Your Dash Cam
Next, take the power cable and connect it to your dash cam. If your dash cam has a built-in battery, make sure to disconnect it before connecting the power cable.
Step 3: Run the Power Cable Under Your Dashboard
Once the power cable is connected to your dash cam, run it under your dashboard and down towards your fuse box. If you have trouble finding your fuse box, consult your car's owner's manual.
Step 4: Locate an Available Fuse
Now that you've found your fuse box, it's time to locate an available fuse. Start by looking for a fuse that is labeled "ACC" or "Accessory". If there isn't a fuse labeled ACC or Accessory, choose a fuse that powers on when you turn your car's ignition.
Step 5: Remove the Fuse
Once you've found an available fuse, use a fuse puller or needle-nose pliers to remove it from the fuse box.
Step 6: Insert the Fuse Tap into the Fuse Box
Now, take the fuse tap and insert it into the fuse box in place of the fuse you removed in the previous step. Make sure that the fuse tap is inserted in the correct direction so that the exposed wires are facing out.
Step 7: Connect the Power Cable to the Fuse Tap
Finally, take the power cable and connect it to the exposed wires on the fuse tap. Once the power cable is connected, reinsert the fuse into the fuse tap. That's it! You've successfully hard wired your dash cam.
Tips for Hand Wiring Your Dash Cam
Now that you know how to hard wire your dash cam, here are a few tips to help you get the most out of it:
1. Use a quality power source: This is one of the most important factors in ensuring your dash cam works properly. Choose a reputable brand and make sure the power source can handle the current draw of your dash cam.
2. Use high-quality cables: Cheap cables can cause all sorts of problems, from data loss to signal interference. If you're not sure which cables to buy, ask the experts at your local electronics store.
3. Use the proper connectors: Make sure you use the right connectors for your dash cam. Some dash cams come with specific connectors that must be used, while others can use standard automotive connectors.
4. Keep it clean: Dust and dirt can build up on the sensors and lenses of your dash cam, causing image quality to suffer. Be sure to clean your dash cam regularly to keep it working its best.
With these tips in mind, you're ready to start using your hard-wired dash cam. Enjoy the peace of mind that comes with knowing your car is being monitored, and be sure to drive safely!
The Bottom Line
Hard-wiring your dash cam is a great way to ensure that it always has power and is ready to record. While it may seem like a daunting task, hard-wiring your dash cam is actually quite simple and only takes a few minutes. With these 7 easy steps, you'll be up and running in no time!
Our Recommendation for the Best Rear Mirror Dashcam — Redtiger T27 Front and Rearview Mirror Dash Cam
The Redtiger T27 dash cam is our top pick for the best rear mirror dash cam. This high-quality dash cam offers a number of features that make it a great choice for any driver.
First and foremost, the Redtiger T27 dash cam features a wide-angle lens that captures up to 170 degrees of footage. This means that you'll be able to see everything that's happening around you, no matter where you're looking.
In addition, the Redtiger T27 dash cam comes with a number of other features that make it a great choice for any driver.
Finally, the Redtiger T27 dash cam comes with a number of accessories that make it easy to install and use. These include a mount, power cable, and microSD card.
If you're looking for a high-quality dash cam that offers a wide range of features, the Redtiger T27 dash cam is a great choice.
If you need more mirror dash cam options, you must try WOLFBOX Mirror Dash Cam, like WOLFBOX G850-Real 4K UHD Mirror Dash Cam for Car.